1. Specification
1) Species: Radiata Pine/Chinese Fir/LVL/MDF
2) Moisture content: 10-12% The raw material prior to manufacture should be kiln dried to within the 10-12% moisture content range To ensure stability through the successive manufacturing processes.
3) Surface finish: Raw wood moulding profile + Thin gesso coat + water base primer (can be water proof) Coating application would be applied equally on all edges and has a strong adhesion to the Wood substrate throug testing. No visible defects like patching, open finger joints, bleed through, etc After being coated/primed. Mouldings would stay straight and not have excessive bow or spring

2. Manufacturing process
1). Moulding preparation The wood blanks are maufactured in mouling profiles.
2). Surface sand following moulding preparation, Machined(produced) with high speed planing equipment To yield a premium finish timber moulding ready for priming with a gesso coating.
3). Priming-stage 1: Mouldings are spray-coated with the 1st application of thin gesso coating.
4). Intermediate sanding stage: Surface sand following priming stage 1
5). Mouldings are spray-coated with the 2st(and final) application of water base primer.
6). Final product check with light sand and buff to the surface, that is readily painted with quality topcoat.

We promise
* Your inquiry related to our products or prices will be replied in 12hours in working date .
* Every penny you paid will be valuable.
* Compensation will be covered in next order even if there is only one pc of failed product.